En
  • دکتری (1395)

    مهندسی مکانیک

    تهران، تهران، ایران

  • کارشناسی‌ارشد (1390)

    مهندسی مکانیک

    صنعتی شریف، تهران، ایران

  • کارشناسی (1388)

    مهندسی مکانیک

    صنعتی امیرکبیر، تهران، ایران

  • رباتیک
  • هوش مصنوعی
  • مکاترونیک
  • اتوماسیون صنعتی
  • آزمایشگاه رباتیک و مکاترونیک (آمیک)

مجید ساده‌دل مدرک کارشناسی را از دانشگاه صنعتی امیرکبیر که به پلی‌تکنیک تهران معروف است در سال 1388، مدرک کارشناسی ارشد را از دانشگاه صنعتی شریف در سال 1390 و مدرک دکتری را از دانشگاه تهران در سال 1395 دریافت نمود. از سال 1396 او در دانشکده مهندسی مکانیک دانشگاه تربیت مدرس فعالیت می‌کند و در حال حاضر استادیار است. او موسس و مدیر شرکت آینده‌پویان مکاترونیک ایرانیان (آمیک) در دانشگاه تربیت مدرس است. علایق پژوهشی او شامل رباتیک، هوش مصنوعی، مکاترونیک و اتوماسیون صنعتی می‌شود.

ارتباط

رزومه

Behavior-Based Navigation of an Autonomous Hexapod Robot Using a Hybrid Automaton

Mostafa Khazaee, Majid Sadedel, Atoosa Davarpanah
Journal PapersJournal of Intelligent & Robotic Systems , Volume 102 , Issue 2, 2021 June , {Pages 24-Jan }

Abstract

The hexapod robot is one of the important classes in legged robots due to its great potential to operate in complex settings with high stability and flexibility. However, few researches have investigated the navigation and autonomous locomotion of this type of robot. This paper concerns with the behavior-based control and navigation of an autonomous hexapod robot utilizing a hybrid automaton. Switching between the distinct behaviors is based on the sensory data, and no representation of the environment is included. Since these systems are likely to rise chattering phenomenon, a sliding mode including clockwise and counter-clockwise boundary following behaviors are considered between the goal attraction and obstacle avoidance modes to modify

Dynamic modeling and decoupled control of linear and angular velocity for robotic fish

F Dehkordi, M Sadedel
Journal Papers , , {Pages }

Abstract

Rigid vs compliant contact: an experimental study on biped walking

M Khadiv, SAA Moosavian, A Yousefi-Koma, M Sadedel, ...
Journal Papers , , {Pages }

Abstract

Heel-strike and toe-off motions optimization for humanoid robots equipped with active toe joints

Majid Sadedel, Aghil Yousefi-Koma, Majid Khadiv, Faezeh Iranmanesh
Journal PapersRobotica , Volume 36 , Issue 6, 2018 March , {Pages 925-944 }

Abstract

In this paper, a walking pattern optimization procedure is implemented to yield the optimal heel-strike and toe-off motions for different goal functions. To this end, first, a full dynamic model of a humanoid robot equipped with active toe joints is developed. This model consists of two parts: multi-body dynamics of the robot which is obtained by Lagrange and Kane methods and power transmission dynamic model which is developed using system identification approach. Then, a gait planning routine is presented and consistent parameters are specified. Several simulations and experimental tests are carried out on SURENA III humanoid robot which is designed and fabricated at the Center of Advanced Systems and Technologies located in the University

Investigation on Adding Passive Toe Joints to the Feet Structure of 2D Humanoid Robot

Majid Sadedel, Faezeh Iranmanesh
Journal Papers , Volume 16 , Issue 53, 2018 January 1, {Pages 157-170 }

Abstract

The main objective of this paper is to design a passive toe for Surena||| humanoid robot which is designed and fabricated at the center of advanced systems and technologies of the University of Tehran (CAST). To this end, a 2D model of robot has been adopted. The first step is to design the trajectory of joints neglecting the toe joints. The second step is to investigate the motion stability of the humanoid robot which has equipped with a passive toe using zero moment point criteria. For this purpose, angles of the passive toe during motion is needed which is obtained using vibrational equations. Afterward, the dynamic model of the robot is derived. Constraint-relaxation method is used to determine the reaction forces on the robot, then cal

Online adaptation for humanoids walking on uncertain surfaces

Majid Khadiv, S Ali A Moosavian, Aghil Yousefi-Koma, Hessam Maleki, Majid Sadedel
Journal PapersProceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering , Volume 231 , Issue 4, 2017 April , {Pages 245-258 }

Abstract

In this article, an online adaptation algorithm for bipedal walking on uneven surfaces with height uncertainty is proposed. To generate walking patterns on flat terrains, the trajectories in the task space are planned to satisfy the dynamic balance and slippage avoidance constraints and also to guarantee smooth landing of the swing foot. To ensure smooth landing of the swing foot on surfaces with height uncertainty, the preplanned trajectories in the task space should be adapted. The proposed adaptation algorithm consists of two stages. In the first stage, once the swing foot reaches its maximum height, the supervisory control is initiated until the touch is detected. After the detection, the trajectories in the task space are modified to g

Adding low-cost passive toe joints to the feet structure of SURENA III humanoid robot

Majid Sadedel, Aghil Yousefi-Koma, Majid Khadiv, Mohhamad Mahdavian
Journal PapersRobotica , Volume 35 , Issue 11, 2017 November , {Pages 2099-2121 }

Abstract

Adding active toe joints to a humanoid robot structure has lots of difficulties such as mounting a small motor and an encoder on the robot feet. Conversely, adding passive toe joints is simple, since it only consists of a spring and a damper. Due to lots of benefits of implementing passive toe joints, mentioned in the literature, the goal of this study is to add passive toe joints to the SURENA III humanoid robot which was designed and fabricated at the Center of Advanced Systems and Technologies (CAST), University of Tehran. To this end, a simple passive toe joint is designed and fabricated, at first. Then, stiffness and damping coefficients are calculated using a vision-based measurement. Afterwards, a gait planning routine for humanoid r

Investigation on dynamic modeling of surena iii humanoid robot with heel-off and heel-strike motions

Majid Sadedel, Aghil Yousefi-Koma, Majid Khadiv, Saeed Mansouri
Journal PapersIranian Journal of Science and Technology, Transactions of Mechanical Engineering , Volume 41 , Issue 1, 2017 March 1, {Pages 23-Sep }

Abstract

The understudy SURENA III humanoid robot was designed and fabricated at the Center of Advanced Systems and Technologies (CAST) located in the University of Tehran. In this paper, a full dynamic model of SURENA III in different walking phases including heel-off and heel-strike motions is presented. To this end, first a trajectory planning method based on robot kinematics is introduced. Then, the multi-body dynamics of the robot links are calculated using Lagrange and Kane approaches which are then verified. In this model, the power transmission system is considered to be ideal. Afterward, system identification routine is adopted to model the dynamic behavior of the power transmission system. By adding the calculated actuating

Optimal gait planning for humanoids with 3D structure walking on slippery surfaces

Majid Khadiv, S Ali A Moosavian, Aghil Yousefi-Koma, Majid Sadedel, Saeed Mansouri
Journal PapersRobotica , Volume 35 , Issue 3, 2017 March , {Pages 569-587 }

Abstract

In this study, a gait optimization routine is developed to generate walking patterns which demand the lowest friction forces for implementation. The aim of this research is to fully address the question “which walking pattern demands the lowest coefficient of friction amongst all feasible patterns?”. To this end, first, the kinematic structure of the considered 31 DOF (Degrees of Freedom) humanoid robot is investigated and a closed-form dynamics model for its lower-body is developed. Then, the medium through which the walking pattern generation is conducted is presented. In this medium, after designing trajectories for the feet and the pelvis, the joint space variables are obtained, using the inverse kinematics. Finally, by employing a

Rigid vs compliant contact: An experimental study on biped walking

Majid Khadiv, S Ali A Moosvian, Aghil Yousefi-Koma, Majid Sadedel, Abbas Dashkhaneh, Saeed Mansouri
Journal PapersarXiv preprint arXiv:1709.06314 , 2017 September 19, {Pages }

Abstract

In this paper, the main goal is to present an experimental comparison of the two prevailing contact modeling approaches of bipedal locomotion, ie rigid versus compliant contact model. To do this, first, an explicit dynamics model for the robot multibody with rigid model of contact for various phases of walking is developed. Then, in order to develop a model with compliant contact, a physically oriented software is exploited and using its tools the robot multibody is modeled. To model the unilateral contact in interaction points in this software, a nonlinear compliant contact model is proposed. Finally, the drive mechanism dynamics is modeled through a linear identification routine. By adding the drive system dynamics to both models, the pro

Heel-off and toe-off motions optimization for a 2D humanoid robot equipped with active toe joints

Majid Sadedel, Aghil Yousefi Koma, Faezeh Iranmanesh
Journal PapersModares Mechanical Engineering , Volume 16 , Issue 3, 2016 May 15, {Pages 87-97 }

Abstract

In this paper, the effects of the addition of an active toe joint on a 2D humanoid robot with heel-off and toe-off motions are studied. To this end, the trajectories of joints and links are designed firstly. After gait planning, the dynamic model of the humanoid robot in different phases of motion is derived using Kane and Lagrange methods. Then, the veracity of the derived dynamic model is demonstrated by two different methods. The under-study model, is in accordance with the features of SURENA III, which is a humanoid robot designed and fabricated at the Center of Advanced Systems and Technologies (CAST) located in University of Tehran. Afterward, the optimization procedure is done by selection of two different goal functions; one of them

Experimental Identification and Nonlinear Position and Attitude Control of a Quadrotor

Mojtaba Rastegari, Seyed Saeid Mohtasebi, Aghil Yousefi-Koma, Majid Sadedel
Journal PapersSecond International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering (ICE) , 2015 August , {Pages }

Analytical dynamic modelling of heel-off and toe-off motions for a 2d humanoid robot

Majid Sadedel, Aghil Yousefikoma, Faezeh Iranmanesh
Journal PapersJournal of Computational Applied Mechanics , Volume 46 , Issue 2, 2015 July 1, {Pages 243-256 }

Abstract

The main objective of this article is to optimize the walking pattern of a 2D humanoid robot with heel-off and toe-off motions in order to minimize the energy consumption and maximize the stability margin. To this end, at first, a gait planning method is introduced based on the ankle and hip joint position trajectories. Then, using these trajectories and the inverse kinematics, the position trajectories of the knee joint and all joint angles are determined. Afterwards, the dynamic model of the 2D humanoid robot is derived using Lagrange and Kane methods. The dynamic model equations are obtained for different phases of motion and the unknowns, including ground reactions, and joint torques are also calculated. Next, the derived dynamic model

Experimental Identification and Nonlinear Position and Attitude Control of a Quadrotor

M Rastegari, SS Mohtasebi, A Yousefi-Koma, M Sadedel
Journal Papers , , {Pages }

Abstract

Offline path planning, dynamic modeling and gait optimization of a 2D humanoid robot

Majid Sadedel, Aghil Yousefi-koma, Majid Khadiv
Conference PapersRobotics and Mechatronics (ICRoM), 2014 Second RSI/ISM International Conference on , 2014 October 15, {Pages 131-136 }

Abstract

In this article, offline path planning for walking of a 2D humanoid robot with 6 Degrees of Freedom (DoF) is performed. This path planning is based on foot and hip trajectories. To make sure that walking cycle is stable, Zero Moment Point (ZMP) criterion is used. Full dynamic model of the humanoid robot in Single Support (SS) phase and Double Support (DS) phase are calculated by the use of Lagrange and Kane methods. By comparison of Lagrange and Kane methods, the dynamic model is verified. A Genetic Algorithm (GA) optimization of walking gait is proposed in which minimum energy consumption and maximum walking stability are two goal functions of this optimization. Finally the best stride length for each robot velocity is determined.

Dynamics modeling of fully-actuated humanoids with general robot-environment interaction

Majid Khadiv, S Ali A Moosavian, Majid Sadedel
Conference PapersRobotics and Mechatronics (ICRoM), 2014 Second RSI/ISM International Conference on , 2014 October 15, {Pages 233-238 }

Abstract

In this article, a general method for dynamics modeling of a humanoid robot which interacts with its environment is presented. This general method is based on developing equations assuming no interaction with its environment. Then, consistent constraints in different phases of motion are taken into account. In this method, each holonomic interaction constraint is considered as an unknown force/ moment which are then mapped into joint space of the robot, using transpose of jacobian matrices of interaction points. To this end, constrained dynamics model for the robot with broad-spectrum interaction with its environment in different phases of motion is encapsulated. In order to validate the proposed method, a dynamics model for a 21 DOF humano

ارائه معیارهای سینماتیکی وزندار در فضای کاری جهت طراحی رباتهای برونپوش بالاتنه

Mehdi Jokar, Aghil Yousefi-koma, Ali Taherifar, Majid Sadedel
Conference PapersFirst RSI/ISM International Conference on Robotics and Mechatronics (ICRoM) , 2013 February , {Pages }

Abstract

Path planning of a biped robot using inverse kinematics and gait parameters optimization (in Persian)

N Mazrae, A Yousefi-koma, A Hasanzade, M Sadedel, A Shahrokhshahi, ...
Journal Papers , , {Pages }

Abstract

Weighted kinematics criteria in the workspace for designing upper-body exoskeleton robots (in Persian)

M Jokar, A Yousefi-koma, A Taherifar, M Sadedel
Journal Papers , , {Pages }

Abstract

Control of a 3-DoF upper body exoskeleton robot using a control lever (in Persian)

M Sadedel, A Yousefi-koma, A Taherifar, M Jokar
Journal Papers , , {Pages }

Abstract

/pro/academic_staff/majidsadedel/publication

دروس نیمسال جاری

  • كارشناسي ارشد
    اتوماسيون صنعتي ( واحد)
    دانشکده مهندسی مکانیک، گروه مهندسي ساخت و توليد
  • كارشناسي ارشد
    مباحث منتخب در طراحي كاربردي (اتوماسيون صنعتي) ( واحد)
  • كارشناسي ارشد
    رباتيك پيشرفته ( واحد)
  • كارشناسي ارشد
    كنترل رباتها ( واحد)

دروس نیمسال قبل

  • كارشناسي ارشد
    رياضيات مهندسي پيشرفته ( واحد)
    دانشکده مهندسی مکانیک، گروه مهندسي ساخت و توليد
  • كارشناسي ارشد
    رياضيات پيشرفته 1 ( واحد)
  • كارشناسي ارشد
    ديناميك ( واحد)
  • كارشناسي ارشد
    طراحي سيستمهاي كنترل پيشرفته ( واحد)
  • كارشناسي ارشد
    كنترل رباتها ( واحد)
  • 1400
    جهان بخش, محمدسعيد
    طراحي، بهينه سازي و ساخت مكانيزم نشانه روي X-Y
  • 1400
    قاسمي, حميدرضا
    داده ای یافت نشد
    داده ای یافت نشد
    داده ای یافت نشد

مهم

جدید

    اطلاعیه ای درج نشده است